Error Codes, Errors, and Their Resolution
Your height-adjustable ASSMANN desk displays an error code on the screen or is not functioning as expected? Below, you'll find a list of error codes, their causes, and suggestions for solutions.
| Error / Error Code | Resolution |
|---|---|
| Control unit malfunction or no display |
|
| RST (RESET) | Lower the table to the lowest position 🡆 Perform RESET |
| 888 / 000 | Replace the manual switch |
| H01 | Overload due to continuous operation, interrupt power supply or wait for 20 minutes and put it back into operation 🡆 Perform RESET |
| E01 / E02 / E03 | Surge protection (Overload) 🡆 Perform RESET |
| E07 / E08 / E09 | Ensure that all faulty connections are secure (motor column to control unit, control unit to manual switch, etc.) 🡆 Perform RESET |
Steps to Initialize (RESET) Your Desk
- Press and hold the down button on the manual switch until the desk reaches its lowest height. Release the down button.
- Press and hold the down button again until the LED display shows "RST." Release the down button.
- Press and hold the down button again for a few seconds until the desk slightly lowers and then gently rises to its maximum height. Now, release the down button.
- Your desk is now configured and ready for use.